98
Figure 4- 25
Please see Figure 4- 25.
System Time: Here is for you to modify system time. Please click Save button after your
completed modification.
Date Format: Y-M-D, M-D-Y or D-M-Y.
Date Separator: ., - or /.
Time Format: 12-hour or 24-hour standard.
Language: Select language.
HDD Full: There are two options: stop recording or overwrite the previous files when HDD
is full. When current working HDD is overwriting or it is full now, system stops record.
If current working HDD is full now, system goes to overwrite the previous file.
Pack Duration: Here you can select file size. The value ranges from 1 to 120.Default
setting is 60 minutes.
Device No.: Set device no.
Video Standard: There are two options: PAL/NTSC which will accord current video
standard of the system. Please note, for the Web user, this information is for reference only.
You cannot modify.
Resolution: You can modify local output resolution to 1280*1024 or 1920*1080.
DST: Check the box in front of DST to enable. You may set the start and end time of DST
by week or date.
To Next Page
Loading...
