22
Chart 3- 4
3.1.8 Display Setting
Video Matrix has no output by default after first boot up. You may set it on main menu.
Figure 3- 7
In output list, click output channel name to select designated split window. Please see Figure 3- 7.
When current output interface’s current output channel does not have
corresponding input channel, the status info is blank. You may click this
channel to view it, and its corresponding area will turn yellow.
If current output interface’s output channel has been set up remote input
device device channel, then device ID, IP address, device type, channel
name, manufacturing protocol will be displayed. When you click this
channel, you will see icon which allow you to close displayed
contents in this channel.
If current output interface’s output channel has been set up local input
device channel, then name, slot, channel will be displayed. When you click
this channel, you will see icon which allow you to close displayed
contents in this channel.
To Next Page
Loading...
