82
4 Web Operation
4.1 Network Connection
Before web client operation, please check the following items:
Network connection is right for the device and PC.
PC network setting is right, including IP address, subnet mask and gateway. (If there is no
router in network, then allocate IP address in same net section. Otherwise, set gateway and
subnet mask.)Please refer to Chapter 3: main menusettingnetwork.
Use order ping ***.***.***.***( IP address) to check connection is OK or not. Usually the
return TTL value equal to 64.
Set Internet Explorer: Tools-Internet Option-Security-Custom Level. Enable or prompt
ActiveX and plug-in. IE7 and IE8 are preferred.
Open the IE and then input IP address.
System can automatically download latest web control and the new version can overwrite
the previous one.
If you want to un-install the web control, please run uninstall webrec2.0.bat. Or you can go to
C:\Program Files\webrec to remove single folder. Please note, before you un-install, please
close all web pages, otherwise the un-installation might result in error.
4.2 Login and Logoff
Figure 4- 1
Open IE and input address in the address field. For example, if your IP is 10.43.200.141, then
please input http:// 10.43.200.141 in IE address field and press enter. Please see Figure 4- 1.
Please input your user name and password. Default factory name is admin and password is
admin.
Note: For security reasons, please modify your password after you first login.
Then you can select the login mode: LAN and WAN.
To Next Page
Loading...
