Dahua VEC0404HD-M70 - Output Device Tree Introduction

18
No.
Name
Function Description
1
Current
Output
Display current output slot name
2
Display
window
Display current output screen or cubeless video wall’s splicing illustration.
Click channel, and if its corresponding area turns yellow, it is selected
successfully.
Support1, 4, 8, 9, 16 channel display at the same time.
3
Display
Control
Area
Display
mode
selection
area
Display mode：single channel, 4-ch, 8-ch, 9-ch and 16-ch available.
(device differ for different number of channels)
Under single channel mode, you may select 1
st
to 16
th
channel.
Under 4-ch mode, you may switch among :

1
st
to 4
th
channel

5
th
to 8
th
channel

9
th
to 12
th
channel

13
th
to 16
th
channel
Under 6-ch mode, you may switch between 1
st
to 6
th
channel and 7
th
to 12
th
channel, and 13
th
to 18
th
channel.
Under 8-ch mode, you may switch between 1
st
to 8
th
channel and 9
th
to 16
th
channel.
Under 9-ch mode, you may switch between 1
st
to 9
th
channel and 8
th
to 16
th
channel.
Under 16-ch mode, you may view full 16 channels at the same time
Independent display button. It allows an independent view of any
window selected in a single screen or independent view plus
crossing screen function in a cubeless video wall. To exit, you need
to re-split and drag selected window.
May split all cubeless video wall units into one.
May split all cubeless video wall units into four.
Favorites，you may save combination of display channels which you
often monitor.
Tour button，support tour decoding and wall mount.
Sound on/off.
4
Shortcut
Menu
Click to enter homepage.
5
Input and
Output
Device
Show input and output devices of each slot and channel
Click this button to switch to output device list.
Click this button to switch to input device list.
Chart 3- 1
3.1.5 Output Device Tree Introduction
The output device tree is show as follows; please see Figure 3- 4 and Chart 3- 2.