Dahua VEC0404HD-M70 - Display Control Area Introduction

21
Chart 3- 3
3.1.7 Display Control Area Introduction
The display control area is shown as follows; please see Figure 3- 6 and Chart 3- 4.
Figure 3- 6
No.
Name
Function Description
1
Decoding
Card List Area
List of Decoding Card inserted in slot, when an Decoding Card is inserted
into current slot, will display. You may click it to extend the list as will
change to . Meanwhile the current Decoding Card’s corresponding input
interface name will be listed.
2
Input Interface
List Area
Display all input interface names under current Decoding Card. After control
area displays, select channel. By double clicking input interface name, you
may switch from local input channel to currently selected input channel.
3
Remote Input
List Area
Display added remote device list, and devices may be DVR, IPC and
otherencoding devices. It will display icon, and you may click it to
extend the list as . Meanwhile channels supported by current remote
device will be listed.
4
Remote Input
Channel List
Area
Display all input channel names under surrent remote device. After control
area displays, select channel. By double click input interface name, you
switch from remote input channel to currently selected input channel.
5
Input Group
When there is input group, it will display icon and you may click it to
extend the list as . Current input group name will be displayed.
1
2
3