Update period can be set to 0 to 65535 min. Default is 10 min. Click save when you are done.
When first two update get successfully, SNTP server will sync system time immediately.
Note:
Check to enable item after setup.
4.2.3.9 Alarm Center
Figure 4- 35
Please see Figure 4- 35.
Please set the corresponding parameters:
Server IP: Input address of alarm receiver server.
Port: set range 1~65535.
Date: Never, everyday, Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, and Saturday.
Time: range 0~23.
Please make sure you have enabled this function and saved the settings. When external alarm is
triggered, the system will automatically submit alarm information.
4.2.3.10 UNPN
To Next Page
Loading...
