108
Figure 4- 36
Please see Figure 4- 36.
It allows you to establish the mapping relationship between the LAN and the public network.
Same with local config.
Here you can also add, modify or remove UPNP item.
Port mapping: Enable UPNP function.
Status: Display UPNP function status: successful, failed and searching.
LAN IP: Set LAN IP address.
WLAN IP: Set WLAN IP address which is provided by telecommunication service provider.
Port Mapping List: Display info of added ports.
Note: Double click port to change its config.
4.2.3.11 IP Filter
You may classify valid log in IP and invalid log in IP by enabling white/black list. This is an IP
filter function which can be activated by checking the enable box. Please see Figure 4- 37.
To Next Page
Loading...
