106
Figure 4- 34
Please see Figure 4- 34.
Here you can realize network time synchronization. Please enable current function and then
input IP of the PC of SNTP server, port number, time zone and update interval. Please note the
SNTP supports TCP transmission only and its port shall be 123.The update interval ranges from
0 to 65535. Default value is 10 minutes.
When you complete the above settings, click save button. If you have manually updated the time
setting for twice and saved the changes, SNTP server will immediately sync system time.
You can refer to the following sheet for time zone information.
To Next Page
Loading...
