37
It displays HDD interface status, total capacity of all HDDs, free space, video record start and
end time, status and etc. Please see Figure 3- 24.
Figure 3- 24
In HDD info, add “*” after SN means is it current working disk (i.e. 1*). Status info shows whether
there is conflict in the disk. If disk is damaged, system shows as “?”.
After system booted up, if there is any conflict, system goes to HDD information interface directly.
Please note, system does not ask you to deal with it forcedly.
When HDD confliction occurs, you can check whether system time and HDD time are identical or
not. If they are not identical, please go to General to adjust system time or go to HDD
Management to format HDD and then reboot device. Please see Figure 3- 25.
To Next Page
Loading...
