46
Figure 3- 36
Analog channel: Please select the channel number first.
Slot: Please select the slotl number first. You can select “all” if you want to set for the whole
slots.
Video input: Please select the channel number first. You can select “all” if you want to set for
the whole channels.
Snapshot: Enable it by checking and then you may schedule snapshot. It snapshots 1/s
by default. You can modify it in encode setup.
Holidays: Enable it by checking . You may set vacation mode up to one month.
Period: You may set period for general recording as video recording is operating within this
time period. You may set by day of week while each day has setting in six periods. You can
select “all” if you want to set all days at once.
Pre-record: System can pre-record the video before the event occurs into the file. The value
ranges from 0 to 30 seconds depending on the bit stream.
Note: Pre-record time depends on its bit stream as pre-record time may not be
reached in case of large bit stream.
Record types: There are three types: regular, motion detect (MD) and alarm.
At the bottom of the menu, there are color bars for your reference. Green color stands for
regular recording; yellow color stands for motion detect.
Note: Settings in analog and digital channels are similar.
To Next Page
Loading...
