76
Select config and click delete to delete config. Click add to add config of cubeless video wall.
Please see Figure 3- 76.
Figure 3- 76
Name: Name of the cubeless video wall.
Row: Set number of rows of the cubeless video wall.
Column: Set number of columns of the cubeless video wall.
Windows: Rank all splicing units.
Output screen: Output channel of each splicing unit.
For example, the cubeless video wall is 2*2 as in Figure 3- 77.
Figure 3- 77
Step 1. Set name, row and column of the cubeless video wall. Select output screen and click
apply. (You must click apply every time you select output screen). Click OK. You will see
Figure 3- 78.
To Next Page
Loading...
