Dahua VEC0404HD-M70 - 4.2.1 Matrix Control

85
Please see Figure 4- 6. From left to right are:
 image quality
 fluency
 full screen
 single window
 four windows
 six windows
 eight windows
 nine windows
 thirteen windows
 sixteen windows
 twenty windows
 twenty-five windows
 thirty-six windows
You may flexibly adjust image fluency and real time performance.
6 PTZ Console
Before using PTZ Console, you must set PTZ protocol (please see PTZ setting in system
settings), otherwise you cannot access PTZ control operation.
You may control the direction, step length, zoom, focusing, iris, preset, point-to-point tour, pattern,
auto scan, lighting, wiper, horizontal rotation and other controls.
Step length: It is mainly used to control directions, for example rotation speed of step length 8 is
much faster than of step length 1.
PTZ rotation: It supports 8 directions: up, down, left, right, upper left, upper right, lower left and
lower right.