92
Figure 4- 19
The red area can be dragged to move.
Step 4. Click Splice, and select area to splice, click OK.
Step 5. Click Scheme.
Step 6. Right click scheme to add. Later, you can right click a certain scheme to rename and
delete, or double click scheme to operate. This step may also be performed after all
operations are complete. Output screen and input device config will not be lost.
Step 7. If you have uploaded background and would use this function, check background, and
select picture to upload. All output screen without input device will show this background.
Step 8. Select screen or output screen on the left and then select split mode and group no.
Cubeless video wall can split into 1, 4, 8, 9, 16 and free split (free split is for tour and can
use auto alignment).
Step 9. You can modify decode strategy, and you may drag according to live to fluent.
Step 10. Input device list, including local, net, input group and favorites. Select input device and
drag to window to decode. If input device supports e-zoom function, then click e-zoom.
To Next Page
Loading...
