Dahua VTH Series User Manual

5
2 Installation
 Do not install devices in harsh environment with condensation, high temperature, dust,
corrosive substance and direct sunlight.
 In case of abnormality after powering on the device, cut off the power supply at once, and unplug
the network cable. Power on after troubleshooting.
 Installation should be done by professional teams. Do not dismantle or repair the device by
yourself in case of device failure. Contact after-sales service if you need any help.
 The recommended installation height of the device is 1.6 m from the ground.
Installation height
VTH
Fix the bracket on the wall by screws, hang the VTH on the bracket, and then apply silicone sealant to
the gap between the device and the wall.

Dahua VTH Series Specifications

General

Touch Screen	Yes
Display Type	TFT LCD
Video Compression	H.264
Display Size	7 inch
Resolution	1024 x 600
Network	Ethernet
Operation Method	Touch buttons
Audio	G.711
Network Interface	RJ45
Operating Temperature	-10°C to +55°C