Dahua VTH Series User Manual

12
4 Menu Operations
You can configure the functions of the VTH, such as volume, brightness, and more.
 Only VTH1020J-T supports the Snapshots and Time functions.
 All configurations will be saved after you exit the menu.
Menu
Table 4-1 Menu operations
Icon Function
Used to confirm your operation when you are using the Snapshots and Time
functions (only supported by VTH1020J-T).
Adjust Vol (volume), Bright (brightness), Contrast and BellVol (bell volume), change
Bell and turn off DND (do not disturb).
Turn up Vol (volume), Bright (brightness), Contrast and BellVol (bell volume), change
Bell, turn off DND (do not disturb), and adjust the time.
Select an item.
Exit the menu and lock the screen.
Go back to the previous interface.
Snapshots
You can take snapshots during monitoring, and view the snapshots you have taken.
The VTH can store up to 200 snapshots. If storage is full, the earlier ones will be overwritten.
Taking Snapshots
 During monitoring.

Dahua VTH Series Specifications

General

Touch Screen	Yes
Display Type	TFT LCD
Video Compression	H.264
Display Size	7 inch
Resolution	1024 x 600
Network	Ethernet
Operation Method	Touch buttons
Audio	G.711
Network Interface	RJ45
Operating Temperature	-10°C to +55°C