Dahua VTH2421FB-P User Manual

11
SIP server (2) Figure 2-8
 This VTO works as SIP server.
Select “SIP Server Enable”, and click “OK” to save config. The VTO reboots
automatically.
 Another VTO or platform works as SIP server.
Set parameters by reference to Table 2-1 and click “OK”. The VTO reboots
automatically.
Table 2-1 SIP server description
Parameter
Description
IP Address
IP address of SIP server.
Port
It is 5060 by default when another VTO works as

SIP server.
It is 5080 by default when the platform works as

SIP server.
Username/Password
Use default value.
SIP Domain
It shall be VDP when another VTO works as SIP

server.
It can be null or keep default value when the

platform works as SIP server.
Login Username/
Password
Username and password to login SIP server.
 VTO settings have been completed if the platform or another VTO works as SIP
server.
 If this VTO works as SIP server, “VTO No. Management” and “Room No.
Management” appears in the left parameter tab. Please add VTO and VTH by
reference to “Step 9” and “Step 10”.
(Optional) Login WEB interface again; select “Household Setting > VTO No. Step 9
Management”.
The system displays “VTO No. Management” interface, as shown in Figure 2-9.

Dahua VTH2421FB-P Specifications

General

Brand	Dahua
Model	VTH2421FB-P
Category	Intercom System
Language	English