Dahua VTH2421FB-P User Manual

13
Parameter
Description
Nick Name
Room No.
Set VTH room number.
 VTH room number consists of 1～6 numbers, letters, or
their combinations.. It shall be consistent with room
number configured at VTH.
 When there are master VTH and extensions, to realize
group call function, master VTH short no. shall end with
“#0”, whereas extension VTH short no. shall end with #1,
#2 and #3. For example, if master VTH is 101#0,
extensions will be 101#1, 101#2…
Register Type
Signaling interactive use in SIP system. Adopt default value.
Register Password
2.2.2 VTH Settings
2.2.2.1 Initialization
For the first time, please initialize the password and bind Email. Password is used to enter
project setting interface, while Email is used to retrieve your password when you forget it.
Power on the device.
Step 1
The system displays “Welcome” and enters “Initialization” interface, as shown in Figure
2-11.
Device initialization Figure 2-11
Enter “Password”, “Confirm Pwd” and “Email”. Press [OK]. Step 2

Dahua VTH2421FB-P Specifications

General

Brand	Dahua
Model	VTH2421FB-P
Category	Intercom System
Language	English