10
4.3.2 Configuring VTO Number
The VTO number can be used to differentiate each VTO, and it is normally configured
according to building number.
You can change the number of a VTO when it is not working as SIP server.
The VTO number can contain 5 numbers at most, and it cannot be the same as any room
number.
Log in to the web interface of the VTO. Step 1
Main interface Figure 4-3
Select Local Setting > Basic. Step 2
Device properties Figure 4-4
In the VTO No. input box, enter the VTO number you planned for this VTO, and then Step 3
click Confirm to save.
4.3.3 Configuring Network Parameters
Select Network Setting > Basic. Step 1
TCP/IP information Figure 4-5
To Next Page
Loading...
