42
Only in the Disarm Mode can you enable alarm modes for the areas.
Alarm mode
Figure 4-46
Unlocking 4.6
You can unlock doors connected to the door stations through the indoor monitor when watching
monitoring videos, when someone is calling you from the door station, or when talking to the
people at the door station over the indoor monitor.
Arm/Disarm 4.7
After areas are armed, when alarms are triggered, alarm messages will be pushed to the indoor
monitor.
Make sure that areas you want to arm are armed; otherwise alarms will not be triggered.
Make sure that the area is in the disarmed status; otherwise you cannot arm the area.
When Disarm Mode on the interface is white, it means that the indoor monitor is in the
disarm mode.
4.7.1 Arm
Tap Arm Mode on the main menu. Step 1
To Next Page
Loading...
