24
text-to-speech output as needed. Pointer speed can also
be adjusted.
You can use backup storage as needed.
You can reset Wi-Fi, mobile, and Bluetooth, and app
preferences. You can also erase all data, which means
restoring the indoor monitor to factory settings.
You can see details (battery status, network status, legal
information, model, android version, Android security patch
level, baseband version, Kernel version, build number, and
more) about the indoor monitor.
Tap Network & Internet. Step 4
The Network & Internet interface is displayed.
Tap Ethernet. Step 5
The Ethernet interface is displayed.
Network setting Figure 4-22
Tap Ethernet Ip mode. Step 6
Select static: Enter IP address, gateway, netmask, and then tap CONNECT.
Select dhcp: Tap dhcp, the IP information will be automatically acquired.
Wireless Network
Tap the Settings icon. Step 1
The network settings interface is displayed.
Tap Network & Internet. Step 2
The Network & Internet interface is displayed.
Tap , the Wi-Fi is enabled. Step 3
Tap , the available wireless networks are displayed. Step 4
To Next Page
Loading...
