11
Default system type is analog system and shall be changed to TCP/IP. Otherwise,
it will fail to connect VTH.
2) Click OK to save the settings.
3) Restart the device manually, or wait for auto restart to make the settings effective.
Log in to web interface again. Step 3
Select Network Setting > SIP Server. Step 4
The SIP Server interface is displayed.
SIP server (1) Figure 4-7
Select a SIP server. Step 5
VTO as SIP server
Select Enable next to SIP Server. Step 1
Select VTO from the Server Type drop-down list Step 2
Configure parameters (see Table 4-1 for details). Step 3
Click Save. Step 4
The VTO will restart automatically.
Platform (Express/DSS) as a SIP server
Select Network Setting > SIP Server. Step 1
The SIP Server interface is displayed.
To Next Page
Loading...
