Dahua VTH5341G-W - Page 16

12
SIP server (2) Figure 4-8
Select Express/DSS from the Server Type drop-down list. Step 2
Set parameters according to Table 4-1. Step 3
Table 4-1 SIP server parameter description
Parameter
Description
IP Address
IP address of SIP server.
Port
It is 5060 by default when another VTO works as SIP server.

It is 5080 by default when the platform works as SIP server.

Username/Password
Use default value.
SIP Domain
It shall be VDP when another VTO works as SIP server.

It can be null or keep default value when the platform works as

SIP server.
Login Username/
Password
Username and password to log in to SIP server.
Alternate IP Addr.
IP address of the alternate server.
If alternate server is enabled and Express or DSS works as SIP
server, when Express or DSS cannot work normally, the VTO will
be used as SIP server.
Alternate Username
Username and password for logging in to the alternate server.
Alternate Password
Alternate VTS IP Addr.
IP address of the alternate VTS.
Alternate Server
After entering alternate IP address, username, password, and VTS
IP address, you need to select the Enable checkbox to enable the
alternate server.
Click OK to save the configuration. Step 4
The VTO will restart automatically.
When the platform works as SIP server, if it is necessary to set Building No. and
Building Unit No., enable Support Building and Support Unit first.