Dahua VTO2211G-P User Manual

16
Click Add.
Add VTOs
Configure the parameters, and be sure to add the SIP server itself too.
Table 4-2 Add VTOs
Parameter Description
Rec No.
The VTO number you configured for the target VTO. See the details in
"4.3.2 Configuring VTO Number."
Register Password Keep default value.
Build No.
Available only when other servers work as SIP server.
Unit No.
IP Address The IP address of the target VTO.
Username
The user name and password for the web interface of the target VTO.
Password
Click Save.
4.3.7 Adding Room Number
You can add the planned room number to the SIP server, and then configure the room number on
VTHs to connect them to the network. This section applies to the condition in which a VTO works as
SIP server, and if you use other servers as SIP server, see the corresponding manual for the detailed
configuration.
The room number can contain 6 digits of numbers or letters or their combination at most, and the
room number must be unique.
Log in to the web interface of the SIP server, and then select Household Setting > Room
No. Management.

Dahua VTO2211G-P Specifications

General

Brand	Dahua
Model	VTO2211G-P
Category	Intercom System
Language	English