9
3 Configuration and Commissioning
This chapter introduces basic configurations to the VTO and VTH devices.
Interface and function might vary with the device type you configured for the VTO. The actual
interface and function shall prevail.
Procedure
Before configuration, make sure that there is no short or open circuit.
Plan IP and unit/room number (works as a phone number) for each device.
Configure the VTO. See "3.2 Configuring VTO."
Configure the VTH. See the VTH user's manual.
Check if all settings are correct. See "3.3 Commissioning."
Configuring VTO
Connect the VTO to your PC with a network cable, and for first-time login, you need to create a new
password for the web interface.
3.2.1 Initialization
Power on the VTO.
Go to the IP address of the VTO in the browser.
For first-time login, enter the default IP (192.168.1.108). If you have multiple VTOs, we
recommend changing the default IP address (Network > Basic) to avoid conflict.
To Next Page
Loading...
Need help?
General
