Dahua VTO4202F-MK User Manual

14
Table 3-2 Add VTO
Parameter Description
Rec No. VTO number. See "3.2.2 Configuring VTO Number."
Register Password Keep it default.
Build No.
Available only when other servers work as SIP server.
Unit No.
IP Address VTO IP address.
Username
VTO web interface login username and password.
Password
Click Save.
3.2.6 Adding Room Number
You can add the planned room number to the SIP server, and then configure the room number on
VTH devices to connect them to the network. This section is applicable when the VTO works as the
SIP server, and if you use other servers as SIP server, see the corresponding manual of the servers for
detailed configuration.
The room number can contain at most 6 digits of numbers or letters or their combination, and it
cannot be the same as any VTO number.
Using the VTO in a Villa
Log in to the web interface of the SIP server, and then select Local Settings > Basic.
Device properties
Set Device Type to Villa Station, and then click Save.
Select Household Setting > VTH Management.
Room number management
Click Add.

Dahua VTO4202F-MK Specifications

General

Brand	Dahua
Model	VTO4202F-MK
Category	Intercom System
Language	English