12
SIP server
Select a SIP server.
VTO as SIP Server: This is applicable to only one building.
1) Enable SIP Server.
2) Select Server Type as VTO.
3) Configure the parameters. See Table 3-1.
4) Click Save. The VTO will restart automatically.
Platform (Express/DSS) as SIP server: This is applicable to multiple buildings or units. If
you do not have a platform, use a VTO as the SIP server.
1) Disable SIP Server.
2) Select Server Type to Express/DSS.
3) Configure the parameters.
Table 3-1 SIP server parameter description
Parameter Description
IP Address
IP address of the SIP server.
If Alternate Server is not enabled, the VTO cannot call the VTS.
Port
5060 by default when VTO work as SIP server.
5080 by default when the platform works as SIP server.
Username/Password Keep it default.
SIP Domain
Must be VDP when VTO works as SIP server.
Keep it null or default when the platform works as SIP server.
SIP Server Username/
Password
Used to log in to the SIP server.
Alternate IP Addr. IP address of the alternate server.
Alternate Username
Alternate server login username and password.
Alternate Password
Alternate VTS IP Addr. IP address of the alternate VTS.
Alternate Server
After entering alternate IP address, username, password, and VTS IP
address, you need to enable Alternate Server.
After Alternate Server is enabled, you can only enter the VTS IP
address, and the VTO will restart.
Click OK, and the VTO will restart automatically.
To Next Page
Loading...
Need help?
General
