18
Click , available modules will be displayed.
Keyboard module, card module, and fingerprint module will not be displayed if they have
been added.
Select modules according to the actual layout of the VTO.
The order must be from top to bottom and from left to right.
Click Confirm, and then restart the browser to apply the changes.
3.2.7.2 Configuring Modules
You need to configure room numbers for the button module.
Select Local Settings > Basic > Façade Layout.
Configure the button module
Click .
The room number displayed on the interface corresponds to the added VTH. "888888" is the
number of the management center.
Room list
Select the room number, and then click Save.
To Next Page
Loading...
Need help?
General
