Configuration 16
Log in to the web interface of the VTO, and then the main interface is displayed. See Step 1
Figure 4-3.
Main interface
Figure 4-3
Select Local Setting > Basic. Step 2
The device properties are displayed. See Figure 4-4.
Device properties Figure 4-4
In the VTO No. input box, enter the VTO number you planned for this VTO, and then Step 3
click Confirm to save.
4.2.3 Configuring Network Parameters
Select Network Setting > Basic. Step 1
TCP/IP interface is displayed. See Figure 4-5.
To Next Page
Loading...
