Configuration 13
2) Click OK to save the settings.
3) Restart the device manually, or wait for auto restart to make the settings effective.
Log in web interface again.
Step 3
Select Network Setting > SIP Server. Step 4
The SIP Server interface is displayed. See Figure 5-7.
SIP server (1) Figure 5-7
Select a SIP server. Step 5
VTO as SIP server
Select Enable behind SIP Server. Step 1
Select VTO from the Server Type drop-down list
Step 2
Configure parameters (see Table 5-1 for details). Step 3
Click Save. Step 4
The VTO will restart automatically.
Platform (Express/DSS) as a SIP server
Select Network Setting > SIP Server. Step 1
The SIP Server interface is displayed. See Figure 5-8.
To Next Page
Loading...
