Configuration 17
Click Save. Step 4
5.3.6 Adding Room Number
You can add the planned room number to the SIP server, and then configure the room number
on VTH devices to connect them to the network. VTO works as SIP server will be taken as an
example, and if you use other servers as SIP server, see the corresponding manual for the
details.
The room number contains 6 digits of numbers or letters or their combination at most, and it
cannot be the same as any other VTO numbers.
Log in the web interface of the SIP server, and then select Household Setting > Room Step 1
No. Management.
The Room No. Management interface is displayed. See Figure 5-11.
Room No. management Figure 5-11
You can add single room number or do it in batch. Step 2
Add single room number
1) Click Add. See Figure 5-11.
The Add interface is displayed. See Figure 5-12.
To Next Page
Loading...
