Dahua VTO7541G - Page 21

Configuration 16
VTO No. management Figure 5-9
Click Add. Step 2
The Add interface is displayed. See Figure 5-10.
Add VTO Figure 5-10
Configure the parameters, and be sure to add the SIP server itself too. See Table 5-2. Step 3
Table 5-2 Add VTO configuration
Parameter
Description
Rec No.
The VTO number you configured for the target VTO. See the
details in "5.3.2 Configuring VTO Number."
Register Password
Keep default value.
Build No.
Available only when other servers work as SIP server.
Unit No.
IP Address
IP address of the target VTO.
Username
The user name and password for the web interface of the
target VTO.
Password