refer to the P2P operation manual included in the resources CD.
The P2P interface is shown as in Figure 5- 67.
Check the Enable box to enable P2P function and then click the Save button. Now you
can view the device status and SN.
Figure 5- 67
Here we use cell phone APP to continue.
Step 1 Use cell phone to scan the QR code and download the APP.
Step 2 After installation, run the APP and Live Preview, enter the main interface. Now
you can add device to the APP.
1. Open App; tap to go to the Live preview.
2. Tap at the top left corner, you can see the main menu.
3. Tap Device manager button, you can use several modes (P2P/DDNS/IP and
etc) to add the device. Click to save current setup. Tap Start Live
preview to view all-channel video from the connected device. See Figure
5- 68.
To Next Page
Loading...
Need help?
General