Be careful not to twist the car’s seat belt.
Caution
Be careful not to twist the car’s seat belt.
Caution
Waist belt of car should be tightened up to the
maximum for firm fixation, so it would not swing.
Caution
17
Push the safety seat to contact the back of seat
and then pull out the car’s seat belt.
Then, let the pulled out belt and fastening plate of the
belt to pass through belt path in the backside of main body.
5
Fasten the fastening plate into the buckle.
Push the locking lever located on the opposite side of
fastening plate to open.
Pull shoulder part of car’s seat belt to make it tight as much as
possible and insert it into locking lever.
Then, pull the lever to opposite direction and push to lock.
(Make sure to put the belt inside the locking lever and then push the lever strongly,
so it can hold the belt tightly.)
6
7
8
7
8
Shoulder belt of car
Belt path
Belt pathBelt path
Car’s seat belt
Fastening
plate of car
Buckle of car
To Next Page
Loading...