Checklist for Baby Mode
Please check the below list after completing the installation.
☆
☆
18
Firstly, make sure whether shoulder belt of car is properly
inserted into the locking lever.
Put your weight to the safety seat, and then strongly pull
the shoulder belt of car while pushing belt locking lever
on side to fix it.
For double fixation, hang the fixed belt inside belt guide.
You will get crease on the belt, but there is no problem
with safety.
9
10
Check the above list and if the main body swings more than 3cm, please re-install it according to above instruction.
Are height of shoulder belt and headrest of safety seat suitable?
Are fastening plate and buckle of car’s seat belt securely fastened up?
Is not car’s seat belt twisted?
Is car’s seat belt tightly fastened up?
Is shoulder belt of car fastened strongly inside the locking lever?
Does the main body swing more than 3cm when you shake it?
Belt guide
Shoulder belt of car
Locking lever
Base Base
Installment
diagram viewed
from outside
the car
Installment
diagram viewed
from inside
the car
Completion
Checked
To Next Page
Loading...