Rear
facing
Forward facing
Belt cover
Shoulder belt
hanger
1
2 3
Take off belt cover from back of the main body, and then take out shoulder belt from its hanger.
Put the baby in safety seat,
insert the belt into the nearest
shoulder belt hole.
Insert the belt into belt hanger and then put on the belt cover.
If you cannot see shoulder belt hanger, pull out the front belt and shoulder belt hanger
will come out from the back. Then, you can adjust height of the belt.
Caution
Belt cover should be attached for use.
If the belt cannot perform its function properly, it might risk a life or cause serious injury.
Please adjust location of shoulder belt according to size of the baby.
Otherwise, safety chair might not give the best result.
How to Use Toddler Mode
Angle adjustment of back support at Toddler Mode
Height adjustment of shoulder belt at Toddler Mode
20
For Toddler Mode, angle
of safety seat should be adjusted
from level 1 to 3.
1 2
Pull out the angle adjusting lever
and then push it to the back.
Adjust the main body according
to seat’s angle of the car
from level 1 to 3.
Caution
Danger
To Next Page
Loading...