DAIICHI First7 - How to Use Shoulder Pad at Toddler Mode 21

As shown on the diagram,
if you insert shoulder pad with twisted side,
it will get through smoothly.
Stitched side
Inner side
Outer side
As shown in the diagram,
insert the shoulder belt at the same level
as baby’s shoulder or a little above.
Shoulder pad for toddler should be used for the toddler mode only (For 9kg or above and forward facing)
Caution
How to use shoulder pad at Toddler Mode
21
Take off existing shoulder pad, put out shoulder belt from shoulder belt hanger of the backside.
From back of the safety seat, put shoulder pad for toddler into shoulder belt hole.
(Refer to height adjustment of shoulder belt at Toddler Mode on p. 20)
At this stage, put shoulder pad for toddler into shoulder belt hole that is similar in height of your baby.
Stitched side should face ground.
(Refer to above diagram)
1
2
Caution
Shoulder pad has inner and outer sides.
Cotton part is front and rubber part is back for shoulder pad.
☆
☆
Advice
Rubber part should be closely attached to the baby.
Shoulder pad should be inserted into holes in the same height.
Warning
BackFront
Inner
side
Outer
side