☆
Warning label (yellow label) attached in the front of sewing work cannot be detached.
This company does not take any responsibilities for its detachment.
Warning
Belt cover
33
Take off belt cover at the back of main body,
and then take off shoulder belt from its hanger.
Taken off belt should be pulled out from shoulder belt hole.
Take out shoulder pad and fastening plate from shoulder belt.
Take out shoulder belt,
and then take off seat clip of seat cover.
Take off seat cover from bottom to top.
For belt guide, open the sit to right
and left as it is still attached.
[
Note
]
If you cannot see shoulder belt hanger
You cannot see shoulder belt hanger because it is pushed inside.
In this case, extend shoulder belt while pressing shoulder belt
adjusting lever and you will see the hanger coming up
from the back.
(
refer to p.9
)
3
4
5 6
Seat clip
Seat cover
Main body
Shoulder belt hanger
Shoulder belt
To Next Page
Loading...