Daikin 2AMK40FV1B - Page 13

Si12-891 Removal of PCB
Removal Procedure 11
6
Cut the clamp and
release the wire
harnesses.
7
Remove the 7 screws in
total to remove the
PCB.
8
Lift up the back side of
the electrical box
slightly and unfasten
the hooks of the front.

When reassembling, make
sure that the hooks of the
electrical box are placed on
the PCB.
Step
Procedure Points
(R7597)
(R7598)
(R7602)
(R7603)