Need help?Do you have a question about the Daikin 3MKD75DVM and is the answer not in the manual?
General| Category | Inverter |
|---|---|
| Model | 3MKD75DVM |
| Cooling Capacity | 7.5 kW |
| Heating Capacity | 8.6 kW |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Operating Temperature (Cooling) | 10 to 46 °C |
| Operating Temperature (Heating) | -15 to 24 °C |
| Noise Level (Outdoor Unit) | 49 dB(A) |
Detaching the top panel and front panel by removing screws.
Disconnecting electrical wires and accessing the terminal board.
Opening the terminal board for further operations.
Disconnecting various wire harnesses and connectors.
Removing the main PCB and the service monitor PCB.
Removing the inverter PCB (MID2).
Disconnecting wires and removing the fan motor.
Heating and disconnecting the first brazed point of the four-way valve.
Disconnecting the final point (d) and removing the four-way valve.
Detaching brazed points (e, f) and removing the defrost solenoid valve.
Heating and disconnecting the 5 brazed parts to remove the distributor.
Disconnecting the compressor's electrical lead wires.
Disconnecting the brazed part at the compressor's suction side.
Final removal of the compressor unit.
To Next Page
