ESIE16-02B | Part 2. Troubleshooting 2.1. Error codes check
4/04/17 | Version 1.1 Page 17
RA R32 Split & multi split M-Series
Part 2. Troubleshooting
This part contains the following chapters:
2.1. Error codes check
2.1.1. Error codes via remote controller
2.1.1.1. General
If operation stops due to malfunction, the remote controller’s operation LED blinks, and malfunction code is displayed. (Even if stop
operation is carried out, malfunction contents are displayed when inspection mode is entered.) The malfunction code enables you
to tell what kind of malfunction caused operation to stop.
2.1.1.2. How to reset error codes
When the problem is solved, you can reset the error by pushing the ON/OFF-button.
2.1.1.3. History of error codes
Not applicable for this remote controller.
Error codes check ................................................................................................................................................................................17
Error based troubleshooting .................................................................................................................................................................20
Symptom based troubleshooting..........................................................................................................................................................42
Component checklist............................................................................................................................................................................43
Other capacity range ............................................................................................................................................................................59
To Next Page
Loading...
Need help?
General
