• Indoor units • EKHBH-X016AB
•Altherma
TM
• Indoor units
80
7 Installation
7 - 1 Drainage instructions
2
7
EKHBDP
1. Refer to psychometric chart for more information.
2. If condensation is expected, installation of EKHBDP - drainpan kit must be considered.
Leaving water temperature [°C]
Dry bulb temperature [°C]
Example:
With ambient temperature of 25°C and
relative humidity of 40%.
If leaving water temperature is below
12°C, condensation on water piping
will happen.
Maximum leaving water
temperature cooling mode
= 22°C
Relative humidity 40%
Relative humidity 60%
Relative humidity 80%
Leaving water temperature [°C]
4TW57759-3
Leaving water temperature limit to prevent condesation
To Next Page
Loading...
