SS-DAX www.daikinac.com 01/23
ELECTRIC AIR HANDLERS
FOR 7½ & 10-TON SPLIT SYSTEMS
■ Standard Features
• Uplow or horizontal (le side) installaon posions in
7½ and 10-ton cooling only or heat pump applicaons
• Circuited for use with one (1) 7½-ton or one
(1) 10-ton cooling-only or heat pump system.
Also circuited for use with two (2) 4-ton or
two (2) 5-ton cooling-only units
• TXV Control; Units have two (2) thermal
expansion valves
• DAX units feature two 5-speed direct-drive motors
• Copper tube/aluminum n coils
• AHRI Cered; ETL Listed
* Complete warranty details available from your local dealer or at www.daikincomfort.com.
DAX Commercial
■ Contents
Nomenclature ...............................2
Product Specicaons ..................3
Airow Data ..................................4
Temperature Rise .........................6
Electrical Heater Kits .....................7
Dimensions ....................................8
Wiring Diagrams ...........................9
Accessories .................................11
■ Cabinet Features
• Heavy-gauge, reinforced, galvanized-steel cabinet
• Fully insulated with berglass blanket
• Horizontal and vercal condensate pans
• Built-in lter rack (2" lter included)
• Entry on top of panel for both low and high voltage
• Removable access panels make
servicing of unit faster and easier
Need help?
General
To Next Page