Daikin DCPH02 - Page 37

DHOS-CS-IM-2107004D 34
Point Attribute
Point Types
available with
attribute
Function
AV Range
Level, Value
This is used to convert device value to actual value.
Min, Max does not allow empty.
If min is 0 and max is 1 are set, device value will not
convert.
In case of WAGO Ai or Ao is used, min and max have
to set actual min and max value.
For example: CO2 sensor which min value is 400 and
max value is 5000. Then min has to set to 400 and max
set to 5000.
Decimal Points
Level, Value
Sets the decimal points for values displayed in user
app.
Unit
Level, Value
Sets the unit of measurement for values displayed in
user app.
*NOTE: Name and Icon are important attributes to edit for setup.