Daikin DIII-NET - Figure 18, System Zone Group Screen; Figure 19, System Menu for Setting up New Zone

IM 1133-C
DIII-NET COMMUNICATION GATEWAY 18 www.DaikinApplied.com
 Highlight the unit DIII-NET Communication Gateway address from the “Group” box.
 Press the double arrow button to add the unit to that zone.
Figure 18, System Zone Group Screen
5. Press the “OK” button twice to get back to the main screen. The main screen should look similar to Figure 19 below. Make
sure the zone group created in step 4 is highlighted with a blue line around it, and then press the “Configure” button. If it is
not highlighted, press to select it.
Figure 19, System Menu for Setting up New Zone
Group box
Zone List box
Add Button
DIII-NET address
New zone group
Double Arrow Button