Daikin DIII-NET - Figure 41, Setting Unit Name; Figure 42, New Management Point on Itouch Manager; Figure 43, Confirm Register Data Point

IM 1133-C
DIII-NET COMMUNICATION GATEWAY 28 www.DaikinApplied.com
Figure 41, Setting Unit Name
10. After the unit’s address and name have been set, press OK. The unit should now appear on the Management Point Data
Register Menu. See Figure 42.
11. Select OK to register the unit. See Figure 42.
Figure 42, New Management Point on iTouch Manager
12. When prompted to confirm the changes, select OK. See Figure 43. The iTM will immediately shutdown after
confirmation. After it has automatically rebooted, the unit should be registered.
Figure 43, Confirm Register Data Point