Daikin DIII-NET - Figure 46, Entering Detailed Information; Figure 47, Icon Selection

IM 1133-C
DIII-NET COMMUNICATION GATEWAY 30 www.DaikinApplied.com
Figure 46, Entering Detailed Information
9. To change the unit’s icon, select Modify next to “Icon” See Figure 45.
10. A list of icons will appear as shown in Figure 47. Select the desired icon and press OK.
11. Select OK to exit menu.
Figure 47, Icon Selection
12. When prompted to confirm the changes, select OK. The iTM will save the changes and shutdown. When the iTM has
rebooted the changes will have been applied. See Figure 43.