IM 1133-C
DIII-NET COMMUNICATION GATEWAY 20 www.DaikinApplied.com
Intelligent Touch Controller Operation
The following section describes basic operation related to the MicroTech
®
III Air Handling unit through the Intelligent Touch
Controller interface. Refer to ED72-423 for more information about the operation of the Intelligent Touch Controller, available
on www.daikinac.com.
MicroTech III Unit Operation
1. Figure 22 shows the MicroTech III Air Handling unit running in Occupied mode.
Figure 22, MicroTech III Air Handling Unit in Occupied Mode
2. Figure 23 shows the MicroTech III Air Handling unit off in Unoccupied mode.
Figure 23, MicroTech III Air Handler Unit in Unoccupied Mode
3. Figure 24 shows the MicroTech III Air Handling unit running in Unoccupied operation (requires optional space sensor,
refer to OM 920 for more information, available on www.DaikinApplied.com)
To Next Page
Loading...
