READ BEFORE OPERATION
Names of Parts
Indoor Unit
5
English
Signal receiver:
• It receives signals from the
remote controller
• When the unit receives a signal,
you will hear a beep sound.
• Operation start ........beep-beep
• Settings changed ....beep
• Operation stop ........beeeeep
It receives signals from the
When the unit receives a signal,
OPERATION lamp (green)
TIMER lamp (orange):
INTELLIGENT EYE lamp
(green):
Indoor Unit ON/OFF switch:
• Push this switch once to start operation.
Push once again to stop it.
• For the operation mode setting, refer to the following table.
Mode Temperature setting Air ow rate
AUTO 25.0°C AUTO
• This switch is useful when the remote controller is missing.
Display
INTELLIGENT EYE sensor:
•
It detects the movements
of people and automatically
switches between normal
operation and energy
saving
operation.
Flaps (Horizontal blades):
Room temperature sensor:
• It senses the air temperature
around the unit.
Deodorizing lter
(enzyme blue)
Front panel
Air lter Air inlet
Display Name
Air outlet
Louvres (Vertical blades):
• The louvres are inside of the air outlet.
Panel tab
To Next Page
Loading...
