Daikin FTK(X)M-P Series User Manual

Remote Controller SiMT041509E
45 Remote Controller
1. Remote Controller
Reference Refer to the following pages for detail.
Note: Refer to the operation manual of applicable model for detail. You can download operation
manuals from Daikin Business Portal:
Daikin Business Portal → Product Information → Operation/Installation Manual
(URL: https://global1d.daikin.com/business_portal/login/
)
Powerful
1
button
• Starts POWERFUL operation.
Display (LCD)
• Changes the temperature setting.
On/Off button
Auto Indoor unit quiet Low
Middle low
MiddleMiddle highHigh
• Press this button once to start
operation.
Press once again to stop it.
Temperature adjustment
buttons
: AUTO
: DRY
: COOL
: HEAT
: FAN
18 ~ 30 °C
Not available
18 ~ 32 °C
10 ~ 30 °C
Not available
• Displays the current settings.
(In this illustration, each section is
shown with all its displays on for the
purpose of explanation.)
Fan setting button
• In indoor unit quiet operation,
operation sound becomes weak.
(The airflow rate also decreases.)
• In DRY operation, the airflow rate
setting is not available.
• Selects the airflow rate setting.
(R22030)
Signal transmitter
•
•
To use the remote controller, aim
the transmitter at the indoor unit. If
there is anything blocking the
signals between the unit and the
remote controller, such as a curtain,
the unit may not operate.
The maximum transmission distance
is about 7 m.
Receiver
HEAT PUMP model ARC466A24
COOLING ONLY model ARC466A25
1 Inverter POWERFUL operation P.22

Daikin FTK(X)M-P Series Specifications

General

Brand	Daikin
Model	FTK(X)M-P Series
Category	Heat Pump
Language	English