SiMT041509E Service Diagnosis
Service Diagnosis 50
3. Service Diagnosis
Method 1 1. When the timer cancel button is held down for 5 seconds,
00
is displayed on the temperature
display screen.
2. Press the timer cancel button repeatedly until a long beep sounds.
The code indication changes in the sequence shown below.
Note: 1. A short beep or two consecutive beeps indicate non-corresponding codes.
2. To return to the normal mode, hold the timer cancel button down for 5 seconds. When the
remote controller is left untouched for 60 seconds, it also returns to the normal mode.
3. Not all the error codes are displayed. When you cannot find the error code, try method 2.
(→ Refer to page 51.)
(R21282)
< ARC466 Series >
Timer cancel button
No. Code No. Code No. Code
1 00 14 U0 27 UA
2 A5 15 C7 28 UH
3 E7 16 A3 29 P4
4 F3 17 H8 30 H7
5 F6 18 H9 31 U2
6 L3 19 C9 32 EA
7 L4 20 C4 33 AH
8 L5 21 C5 34 FA
9 U4 22 J3 35 H1
10 E6 23 J6 36 P9
11 H6 24 E5 37 E3
12 H0 25 A1 38 H3
13 A6 26 E1
To Next Page
Loading...
Need help?
General